Service Telephone£º021-64820099 24-Hour Service Hotline£º15900706965 Mail:info@jichuan.sh.cn
Liqui moly
|
|||||||||||||||||||
Hohlraumversiegelung HV braun
DESCRIPTION Solvent-based corrosion inhibitor for cavity protection HV. It is supplied as a thin,light thixotropic solution with good atomizing properties so that it can also reach relatively inaccessible areas such as narrow gaps between panels. Cavity protection HV infiltrates and displaces moisture. The product contains a high proportion of rust inhibitors. Cavity protection is very finely atomized during spraying, has outstanding creep properties, penetrates well into narrow gaps which need protection (such as welded seams) but does not run significantly out of seams. On drying completely, this product forms a plastic, water-repellent waxy film.- PROPERTIES - high creep TECHNICAL
APPLICATIONS Cavity protection HV is mainly used in the workshop for spraying the inner surfaces of cavities such as the frame side members or the doors. The product can also be used to supplement the existing cavity protection of new vehicles, for re-treatment after 2 - 3 years and for cavity protection after accident repairs. APPLICATION Any rust which may be present on the surfaces to be treated must be thoroughly removed before treatment. The material can be used at low temperatures above 10 ¡ãC but creep behavior is improved if the product and the surface to be treated are at room temperature. Cavity protection HV can be applied using the pressure-feed spray gun for cavities, Part no. 6226 at an operating pressure of 3 - 6 bar depending on the spray pattern desired. Shake contents of can vigorously before use. The drying process may take several days, depending on the type of cavity being treated and the thickness of the film. Adequate ventilation must be provided during drying. AVAILABLE Processing equipment 10 l Part. no. 6117 |
|||||||||||||||||||
